Na'urar Walda ta 630mm Mai Amfani da Na'urar Hita ta Bututun Plastic HDPE

* Ana amfani da babban matakin MCU azaman tushen sarrafawa, tare da saitin sigogi masu yawa, aunawa da cikakken aikin kariya;

* Nunin lu'ulu'u mai haske mai yawa, tallafawa harsuna da yawa, aikin maɓallin taɓawa, hanyar hulɗa ta mutum-inji;

* Faɗin samar da wutar lantarki da shigarwar wutar lantarki, ya dace da matakin cibiyar sadarwa ta lantarki a wurin;

* Babban daidaiton iko ga makamashin lantarki da lokaci, tabbatar da ingancin walda;

*Lokacin amsawa cikin sauri lokacin da wutar lantarki ta karye, kwanciyar hankali mai yawa;

* Goyi bayan rikodin karatun faifai na U;

* Tallafawa tsarin shigo da faifai na U;

* Goyi bayan firintar USB mai ɗaukuwa, rikodin walda na bugawa;

* Tare da aikin bututun daidaitawa na atomatik;

* Kyakkyawan aikin kariya mai ninkawa;

* Tare da har zuwa matakai 6 na aikin walda mai shirye-shirye, ana iya daidaitawa da buƙatun walda bututu daban-daban;

* Goyi bayan shigar da sigogi iri-iri na walda: shigar da hannu, cire dabara, shigar da lambar mashaya;

*Hukumar kula da na'urar ta yi amfani da fasahar walda ta SMT don rage yawan gazawar dukkan na'urar.

Sigogi na Fasaha

Samar da wutar lantarki ta shigarwa	Ƙwaƙwalwar shigarwa mai ƙima	220V ± 20%
	Mitar shigarwar da aka ƙima	45～65Hz
Samar da wutar lantarki	Ƙwaƙwalwar fitarwa mai ƙima	Duba ma'anar nau'in
	Ƙarfin fitarwa	Duba ma'anar nau'in
Halayen sarrafawa	Yanayin sarrafawa	Ƙarfin lantarki mai ɗorewa, wutar lantarki mai ɗorewa
	Daidaiton daidaiton yawan lantarki	≤±0.5%
	Daidaiton sarrafa lokaci	≤±0.1%
	Daidaiton auna zafin jiki	≤1%
	Duba lambar mashaya	Lambar sandar scan 24 bit ta yi daidai da ISO 13950-2007
Yanayi na yanayi	Yanayin zafi na yanayi	-20~50℃
	Zafin ajiya	-30~70℃
	Danshi	20% ~ 90% RH, babu danshi
	Girgizawa	＜0.5G, babu girgiza da tasiri mai ƙarfi
	Tsayi	<1000m AMSL, lokacin da ≥1000m ya rage darajar bisa ga GB/T3859.2-93

Bayanin aiki

1 Walda lokaci ɗaya

 

Bayan an kunna, injin walda yana shiga ta atomatik zuwa mahaɗin walda kamar yadda aka nuna a ƙasa, yana motsa siginar ta hanyar canjin hagu da dama, yana danna maɓallin "Ok" bayan an zaɓi siginar zuwa sigogin da suka dace, sannan sigogin suna cikin yanayin walƙiya.

Ta hanyar maɓallan sama da ƙasa don gyara ƙimar sigogi, danna maɓallin "Ok" don adana ƙimar bayanai. Idan ka danna maɓallin "ESC" don kawar da gyare-gyare, bayanan za su koma ga ƙimar bayanai kafin a gyara su. Saita ƙimar "juriyar bututun 1.03" daidai yake da juriyar bututun da ta dace.

Bayan an saita sigogin walda, matsar da siginar zuwa "RUN" kuma danna "OK" don shigar da tsarin walda.

Lura: Saita "juriyar bututun 1.03" zuwa 0 idan ba ku san juriyar bututun ba, kawai matsalar da'irar budewa (juriyar bututun ta fi ohms 20 ko kuma wutar fitarwa 0) ce ake ganowa yayin gano bututun. Amma wannan saitin zai kashe aikin "ƙararrawa ta gano juriyar bututu", don haka ba za a iya saita shi ba lokacin da ya cancanta.

2 Walda matakai da yawa

 

Idan tsarin bututun yana buƙatar walda matakai da yawa, ya zama dole a gyara "sigogi na saitawa" → ƙimar siga daidai da ƙimar ɓangaren da ake so na "saitin lambar walda 1.02".

Misali: juriyar bututu 0.4Ω, yanayin ƙarfin lantarki mai ɗorewa, walda 3, matakin farko: 35V / daƙiƙa 150, na biyu: 40V / daƙiƙa 250, na uku: 40V / daƙiƙa 280, lokacin sanyaya shine daƙiƙa 100.

Da farko, muna buƙatar gyara ƙimar "saitin lambar matakin walda 1.02" zuwa 3, saita ƙimar "juriyar bututu 1.03" zuwa 0.4Ω, saita ƙimar "sigogin walda 1.04" zuwa 35V, sannan saita ƙimar "1.05 1"^st"Lokacin walda" zuwa daƙiƙa 150. Wannan yana kammala matakin farko na saitunan walda.

A ƙarshe, kuna buƙatar saita ƙimar "lokacin sanyaya bututu 1.16" zuwa daƙiƙa 100. Sannan sai a kammala saitin sigogin walda. Danna maɓallin "ESC" don komawa zuwa mahaɗin walda na jiran aiki, zaku iya ganin ƙimar sigogi da ƙimar lokaci iri ɗaya ne da saitunan da suka gabata. Matsar da siginar zuwa "RUN" kuma danna "OK" don shigar da tsarin walda.

Matakan aikin an nuna su a ƙasa:

Walda ta 3

 

Idan bututun da aka haɗa da lambar mashaya kamar yadda aka nuna a ƙasa, za ku iya karanta ta ta na'urar daukar hoto. Waɗannan sigogin walda na lambar mashaya sune: ƙarfin lantarki mai ɗorewa: 39.5V, lokacin walda: daƙiƙa 200, lokacin sanyaya: mintuna 15.

Bayan mai amfani ya haɗa da kyau, amfani da na'urar daukar hoto don duba lambar barcode da na'urar daukar hoto za ta yi sautin "bep", kuma za ku iya ganin ƙimar sigogin walda da aka bincika ta lambar barcode a wurin haɗin jiran walda.

Lura: 1, Nau'in injin walda kawai yana ɗauke da "S" tare da aikin na'urar daukar hoto mai goyan bayan aikin dubawa;

2, Lambar mashaya ya kamata ta yi daidai da nau'in lambar mashaya ta "nau'in lambar mashaya 3.06";

3. Dole ne a yi amfani da na'urar daukar hoto ta musamman wacce kamfaninmu ya tanadar.

Shawara: lambar laser da lambar bar ba su cika digiri 90 ba, tasirin scanning shine mafi kyau, kusurwar karkatarwa mai tasiri sama da ƙasa shine ±65°, kusurwar karkatarwa mai tasiri sama da ƙasa shine ±60°, kusurwar karkatarwa mai tasiri juyawa shine ±42°. Ana duba lambar bar, don Allah a bar laser ya rufe dukkan lambar bar, in ba haka ba ƙila ba za ku iya karanta bayanan da suka dace ba.

Aikace-aikace

Samfurin shine na'urar haɗa kai ta musamman da ake amfani da ita don haɗa matsi da bututun da ba na matsi ba ko haɗin soket.

"Gaskiya, Kirkire-kirkire, Tsauri, da Inganci" tabbas shine ci gaba da tunanin kamfaninmu na dogon lokaci don kafa tare da abokan ciniki don haɗin gwiwa da riba na shekaru 18 Masana'antar Dn20-200 Injin Walda Mai Aiki da Kai Mai Cikakken Kai, Kasancewar mu ƙaramin kamfani ne mai tasowa, ba za mu iya zama mafi inganci ba, amma muna ƙoƙarin yin iya ƙoƙarinmu don zama abokin tarayya mai kyau.
Masana'antar Shekaru 18Injin walda na lantarki na kasar Sin da injin walda na lantarkiZa mu yi iya ƙoƙarinmu don yin aiki tare da ku kuma mu gamsu da ku dangane da inganci mai kyau da farashi mai kyau da kuma mafi kyawun sabis bayan sabis, da gaske muna fatan yin aiki tare da ku da kuma cimma nasarori a nan gaba!

---

Na baya: Sayarwa mai zafi Factory U Type Galvanized Karfe Karfe Tiyo Matsa Sidil Bututu Matsa

Na gaba: OEM/ODM China Diamita 50mm Samar da Bututun Polymer HDPE Mai Girma Diamita 50mm

---